如何拆卸济南推拉门？

　　很多使用推拉门的朋友有时候需要彻底的清洗推拉门，这时候就需要将推拉门进行拆卸。下面我们就来看看应该怎么拆卸济南推拉门。

　　Many friends who use sliding doors sometimes need a thorough cleaning of the sliding doors, which will require removal of the sliding doors. Now let's see how to remove the sliding doors in Ji'nan.

　　1、找到插头盖底轨推拉门，覆盖滚筒的调节螺钉。看的封面上的门面板的端部朝下方。

　　1, find the plug cover, bottom rail sliding door, covering cylinder adjustment screw. The end of the door panel on the cover looks downward.

　　2、插入插头和框架之间的一个小的平头螺丝刀，撬起插头走出门。

　　2. Insert a small flat headed screwdriver between the plug and the frame and lever the plug out of the door.

　　3、将螺丝刀插入每个孔和降低滚筒逆时针旋转调节螺丝。

　　3. Insert the screwdriver into each hole and lower the drum counter clockwise adjusting screw.

　　4、卸下头停止从部的框架的内侧上的磁道。头站是一块金属，适合在轨道和门。用的无绳螺丝刀卸下固定螺栓固定头停止。

　　4 remove the head and stop the tracks from the inside of the top frame. The head station is a piece of metal, suitable for rails and doors. Remove the retaining bolt with a cordless screwdriver and stop.

　　5、打开推拉门与门面板抢每侧。电梯的门上，和上拉的下轨底部的门。降低面板拉车门面板上轨道，门板设置你的出路。

　　5, open the sliding door and door panels to grab each side. The door on the door of the elevator and the bottom of the lower rail. Lower the panel, pull the car, the facade, the board track, and the door panels to set your way out.

　　6、从框架断开固定面板的滑动玻璃门。根据您的特定的门，可以沿着部，底部和两侧的固定螺丝。用无绳螺丝刀卸下固定螺丝。

　　6. Open the sliding glass door of the fixed panel from the frame. Depending on your particular door, you can fix the screws along the top, bottom, and sides. Remove the retaining screws with a cordless screwdriver.

　　7、提起面板，在面板底部的拉出来底部轨道，拆卸完成。

　　7. Lift the panel, pull out the bottom track at the bottom of the panel and remove it.